EKF Diagnostics Biosen C-Line GP+ User Manual

Setting Up
User Manual Biosen C_line Clinic / GP+
18
18
If the device is not used, it should be put into stand-by mode. In this
mode, the use of energy and system solution is reduced to its minimum
The device does not have a separate mains switch but is separated from
or connected to the mains by the mains plug (cold start). A
disconnection from the mains supply is only recommended if the device
will not be used for an extended period (more than four weeks).
However, the device must not be simply disconnected from the mains. It
must be shut down correctly. Refer to section 11, page 43.

EKF Diagnostics Biosen C-Line GP+ Specifications

General

Brand	EKF Diagnostics
Model	Biosen C-Line GP+
Category	Measuring Instruments
Language	English