Need help?Do you have a question about the EKF Diagnostics Biosen C-Line GP+ and is the answer not in the manual?
General| Brand | EKF Diagnostics |
|---|---|
| Model | Biosen C-Line GP+ |
| Category | Measuring Instruments |
| Language | English |
Warnings and precautions for safe operation and handling of the Biosen device.
Instructions for physically setting up the device and its initial power-on procedure.
Details on preparing the device for operation, including consumables and tubes.
Information about the chip sensors, their function, and types.
Step-by-step guide on how to insert the chip sensor into the device.
Procedure for replacing old chip sensors with new ones.
Guidelines for powering the device on, off, and standby modes.
Detailed procedure for collecting capillary blood samples for measurement.
Explains the device's ready state and accessible functions for measurement.
Procedure for performing sample measurements on the device.
Instructions on how to calibrate the device for accurate measurements.
Guidelines and procedures for performing quality control checks.
How to process urgent samples for faster measurement.
Configuring various operational settings of the device.
Selecting how the device performs calibration (by starting or periodic).
Enabling or disabling measuring channels or sensors.
Specifying the type of sample being measured (hemolysate, serum, etc.).
Procedures for cleaning and disinfecting the device and flow system.
Detailed steps for cleaning the device's exterior and internal parts.
Instructions for cleaning and disinfecting the internal flow system.
Information on replacing key maintenance parts like pump tubes and exchangers.
How to replace the pump tube according to the maintenance schedule.
Procedures for replacing the exchanger and sample cannula.
Important contact information for EKF-diagnostic GmbH.
To Next Page