Device menu
User Manual Biosen C_line Clinic / GP+
9.9 Barcode (optional, only C_line Clinic)
The barcode can be activated or deactivated. The used barcode length
is also adjustable. For reliable barcode recognition the used barcode
length must be set correctly. The length can be adjusted between 0 and
12, where 0 corresponds to a setting with variable barcode length (this
setting is not recommended).
9.10 Maintenance
9.10.1 Cleaning / Disinfection
When confirmed cleaning and disinfection of the flow system is
activated.
The solutions to use must be obtained from EKF-diagnostic GmbH (see
section 16, page 54) and be prepared according to the enclosed
operating instructions. Afterwards place the micro test tube in position
C1 and follow the instructions on the display.
9.10.2 Emptying system
With this function the flow system can be fully emptied.
9.11 Menu type
The following menu types are available:
"Routine"
For easier handling in daily routine, the following greatly reduced
menu is offered:
Stand By (see Section 9.1, p.33)
Counter presetting sample position (see Section 9.2, p.33)
Counter presetting extra position (see Section 9.2, p.33)
Menu type (see Section 9.11, p.38)
Contact (see Section 9.13, p.39)
"Complete"
Here the complete menu, as described in Section 9, page 33 ff
is available.
To Next Page
Loading...
Need help?
General
