EKF Diagnostics Biosen C-Line GP+ User Manual

Measurement operation
User Manual Biosen C_line Clinic / GP+
30
30
pressed. The STAT button only has any effect when a micro test tube is
inserted in the urgent sample position.
7.6 Measured value memory
The measured value memory can be called up in the states Ready and
Measuring.
Figure 23 - Memory
The displayed information is essentially explained in section 7.3, page
28. Some further information is described below.
Probenposition:
Successful calibrations are indicated by "STD".
Memory options:
Measurement values can be printed or sent to the EDP if required.
Furthermore, the measured value memory can be cleared.
The memory options are only available if the memory is called up in the
Ready state, but not while measuring.
"Sends values to EDP"
Last tray  sends the last measured series
Selected tray  sends the series, currently
selected in the memory
Selected value  sends the value, currently
selected in the memory
Position 3-15 H
No. 5*
22.05.13
15:04
Memory
Sample position
Running sample number
Quit memory
next
value
previous
value
Memory options
Date/time
previous
tray
next
tray
BC: 1234567890
Barcode
G 14,24
L 1,05
mmol/L +
mmol/L -
Measuring
channel 1
Measuring
channel 2

EKF Diagnostics Biosen C-Line GP+ Specifications

General

Brand	EKF Diagnostics
Model	Biosen C-Line GP+
Category	Measuring Instruments
Language	English