To Next Page

To Previous Page

2.1 Installation to Existing Stethoscopes

Not applicable to Eko Bundle

Detach Chest Piece

Remove chest piece of the analog stethoscope manually. Grip

the chest piece with one hand and the tubing in the other, then

twist and pull them apart. This may require some force. See

Fig. 1 & 2

Install CORE

Insert the narrow end of CORE into the tubing of the

stethoscope. The metal stem fits into the hollow opening of

the tube.

NOTE: Ensure the smaller end of CORE is connected to the

stethoscope tubing. See Fig. 3 & 4

Fig. 1 Detach the Chest Piece

Fig. 3 Tubing Adapter

and Chest Piece

Fig. 2 Detached Chest Piece

Fig. 4, Left: CORE on Stethoscope Tubing

Right: Connector on Chest Piece

For more information, click here.

Other manuals for EKO CORE

Questions and Answers:

Need help?

Do you have a question about the EKO CORE and is the answer not in the manual?

General