EKO CORE User Manual

For Eko CORE Digital Attachment
and Eko BUNDLE Electronic Stethoscope
Model E4
Electronic Stethoscope System

EKO CORE Specifications

General

Type	Digital Stethoscope
Connectivity	Bluetooth
Amplification	Up to 40x
Software	Eko App
FDA Clearance	Yes
Compatibility	iOS, Android
Charging	USB charging
Features	Noise cancellation
Frequency Response	20Hz - 2kHz

Summary

Introduction, Warnings, and Safety

EMC Compliance

Indications for Use

Precautions

Contents and Operation

CORE Use

Charge Battery

Instructions for charging the CORE device's battery via USB.

Bluetooth Pairing

Steps for pairing the CORE device with a mobile device via Bluetooth.

Cleaning

Cleaning and Disinfecting Procedure

Operating Conditions

CORE Modes and Corresponding LED States

Off

Describes the CORE device being off and sound passing unfiltered.

On, Not Paired

CORE is on, discoverable, and ready for Bluetooth pairing.

On, Paired

CORE is on and paired, streaming audio to a mobile device.

On (quick blink) Playback

CORE is on and playing back sounds from a paired device.

On, Volume Change

CORE is on, adjusting playback volume via buttons or paired device.

On, Low Battery

On, Battery Expired

Off, Charging

Off, Fully Charged

Eko App

Electrical Safety

Guidance and Manufacturer's Declaration - Electromagnetic Immunity