EKO CORE - Cleaning; Cleaning and Disinfecting Procedure

To Next Page

To Previous Page

3.1 Cleaning

Cleaning and Disinfecting Procedure

The stethoscope and CORE should be cleaned between each

patient use. All cleaning instructions pertaining to the original

stethoscope apply.

Under normal conditions it is unnecessary to remove CORE from

the stethoscope tubing for cleaning. All external parts of the

hardware can be cleaned with 70% isopropyl alcohol wipes.

NOTE: DO NOT immerse the device in any liquid or subject it to

any high-pressure/autoclave sterilization processes.

If it becomes necessary to remove CORE, pull the stethoscope

tubing off of the metal stem on both ends of the device. Wipe

all parts of the stethoscope clean with 70% isopropyl alcohol

wipes including CORE’s surface, stethoscope tubing, tubing

connector, and chest piece. Reassemble the stethoscope by

reinserting the metal stems into the stethoscope tubing as

before.

Other manuals for EKO CORE