EasyManuals Logo

EKO KAC3 User Manual

EKO KAC3
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
BASIC OPERATION
ANTENNA
Unwind and extend FM/AM wire antenna to its full length for F/AMM reception and place it
in the position. Which permits best reception.
If FM/AM reception is weak, slightly rotate or re-position the unit to get the best
possible reception.
SETTING THE CLOCK
1 In Radio mode, Press and hold the POWER button to turn the unit o.
2 Press and hold the TIME/MEM button until the display starts to flash.
3 Press the HOUR button to adjust the hour, the PM indicator will light when the
time is set in the PM.
4 Press the MIN button to adjust the minutes.
5 Press the TIME/MEM button to finish setting the time.
TUNING RADIO STATIONS
1 Once turning on the radio, press the POWER/BAND button to switch
between AM or FM.
2 Press the TUN+ or TUN- to adjust the radio to desired frequency. Press and hold
to scan for next desired station.
SAVING A PRESET STATION
1 Once tuning the desired station press and hold the TIME/MEM button and press
TUNE+/- Buttons to choose your desired program location (between P01 and P10).
2 Press the TIME/MEM button again to confirm store current radio station as a preset.
Can save up to 10 preset stations.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EKO KAC3 and is the answer not in the manual?

EKO KAC3 Specifications

General IconGeneral
BrandEKO
ModelKAC3
CategoryClock Radio
LanguageEnglish

Related product manuals