15
To Access the setting OPTION menu:
1. Press the HOME button located on the top of the Projector or
on the Remote Control.
2. With the directional keys, go to SETTINGS located on bottom
right corner.
3. Press the RIGHT arrow button until you get to OPTION.
OSD LANGUAGE: Adjust between English (default), Chinese
RESTORE FACTORY: Press Yes to reset your projector settings and device.
SOFTWARE UPGRADE: Put Firmware into a USB storage device and plug into
USB port of projector, Choose Software Update.
(please note, only use software upgraded provided by
the distributor (Ayonz Pty Ltd - info@ayonz.com).
SETTING - OPTION
To Next Page
Loading...
Need help?
General
