EKO MP-11 - Page 27

EKO INSTRUMENTS CO., LTD. I-V Curve Checker MP-11 Instruction Manual Ver.7
Pg. 26
CASE 4
Analyzing and Managing
MP-11 Main Unit Measurement Data on PC
Measurement Item
Measurement Condition
N/A
 Managing the measured data on PC
 Using the measured data on another application
Required Items
Configuration Image
A. MP-11 Main Unit
B. Battery Receptacle Box or
AC Adapter (1.8m)
C. USB Cable (2m)
D. PC Installed with MP-11
Software
Procedure
Reference Sections
1
Connect MP-11 Main Unit to PC with USB cable.
5-3
2
Turn the MP-11 Main Unit power ON。
8-2
3
Turn ON the PC and startup the MP-11 I-V Checker Software
9-3
4
Setup the communication port between the MP-11 Main Unit and the PC
9-3
5
Setup the folder for loading the data.
9-3
6
Start downloading the measured data
9-3
7
After the data loading is completed, select whether to delete the measurement data
from the Main Unit
9-3
8
Display and analyze the measured data.
9-3
9
Exit the MP-11 I-V Checker Software.
9-3
10
Turn the MP-11 Main Unit power OFF.
8-2
11
Disconnect the MP-11 Main Unit from the PC.
5-3
12
Shutdown the PC
-
A
B
C
D