(2) Selecting Measurement Mode
Manual: The [Start] button has to be pushed for each measurement.
Auto: The measurement is taken automatically by the measurement interval setup for start
and end time.
(3) Auto Measurement Schedule
Enter measurement “start time”, “finish time” and “interval” in the [Auto Measurement Schedule]
section.
(4) Select Directory Folder for Data Saving
Select a directory folder for the data to be saved.
When the [Browse] button is clicked, “Browse for Folder” dialog window appears.
Assign a directory with following function:
a. Directory Tree Window
Select a folder
b. Key Entering
Folder can be assigned by key entering
c. Pull-down Menu for Drive Selecting
Drive can be changed with pull-down menu.
d. Create New Folder
A new folder can be created under a desired directory by clicking this button.
After folder is created, change the folder name by key entering.
(5) Select a folder for Converted Data Folder to save the converted data.
Click [OK] button after the setting is completed. Click [Cancel] button to clear all entered information.
To Next Page
Loading...
