EKO MP-11 - Page 74

EKO INSTRUMENTS CO., LTD. I-V Curve Checker MP-11 Instruction Manual Ver.7
Pg. 73
2) Customizing the Report File
The report file format can be customized. In order to customize the report format, Microsoft Excel
application is required.
(1) Open the “Format.xls” file which is included in the MP-11 software install folder.
(2) Make changes to the report format by editing the “Format” sheet in this file.
・ The cells are already assigned with measurement values, etc., but the “define” sheet
provided; assign the cells which to be shown on the customized report format.
Example: To show the “Time” in the cell “C12”, set up the format sheet as ｜TIME｜C12|
・ To show graph on the report, assign the displaying range by selecting the left top cell and
right bottom cell.
Example: ｜Graph| F5:H22|
(3) Save the “Format.xls” after the editing is finished.
NOTE: Do not change the File name and Sheet name.
File
Home
Insert
Page Layout
Insert
Figure 9-3-22 Customizing Report File
Sheet “define”
Assign the cell position for each
parameter to be shown on the report.
Sheet “Format”
To show Voc in the cell B21, assign Voc
to the [B21] on the sheet “define”.
Insert
Home
Page Layout
Fomula
Data
Pfoof
Display
Development
File
File