1) To Save File:
(1) Enter a measurement date either by directly entering the date in the Date box or select from the
calendar function. The data measured on this specific date are listed on the Data List box.
If the “Include Low Irradiance Data” checkbox is checked, the measurement data with low
irradiance will also appear on the data list.
(2) Select a conversion type from “Selected Data” or “I-V Parameters” for the text data format of
preference. (For more information on data format, see [9-4. Save Data Format] section.)
(3) Place check(s) in the “Select” column in the Data List box for the data to be converted into text data.
If all data to be converted, click [Select All] button. To unselect all selected data, click [Clear All]
button.
(4) Enter specific characters in the “File prefix characters” box. The characters entered here will be
inserted at the head of the file name generated by the file conversion and CSV format file. Follow
the file naming rule described in the [9-4. Save Data Format] section.
(5) Finally click on the [Convert] button to save the CSV file in the assigned folder with the file name
entered in the previous step. Saved file name appears on the “File Name” section with full path.
(6) Select “Create Report” and measurement data then click [Convert] button; the simple report file is
created in Excel format in the specified folder.
To Next Page
Loading...
