EKO MP-11 - Page 72

EKO INSTRUMENTS CO., LTD. I-V Curve Checker MP-11 Instruction Manual Ver.7
Pg. 71
3. Save Tab
Below window will show when the Save tab is clicked.
Since the data measured by MP-11 are not in a format which can be viewed on spreadsheet software, such
as Microsoft Excel, the measurement data are converted in CSV file format (which can be viewed on spread
sheet software) on this tab, and saved in a specified folder.
Table 9-3. Save Tab Functions
Functions
Details
1
Date (Calendar Function)
Displays the measured dates.
By clicking the dropdown list button, calendar appears and allows to select
desired date from the calendar by click.
2
Includes Low Irradiance Data
checkbox
Check here to list the measurement data with irradiance lower than the
threshold setup in the “Reference Solar Irradiance” setting.
3
Data List
List of data which are subjected to the measurement date(s) are listed in
this window.
4
Name filter
Narrows down the data search by PV module/array name.
Enter the PV module/array name and press Enter key.
5
Select All Button
Select all data listed in the Data List at once.
6
Clear All Button
Unselect the multiple data which are selected in the Data List at once.
7
Conversion
Select methods of saving text data or creating reports and enter the file
prefix character for identification.
Saved file name is displayed on the “File Name” section with full path.
8
Convert Button
Execute the text file conversion and creates a file by clicking this button.
Figure 9-3-19. Save Tab
1
2
3
4
5
6
8
7