EKO MS-80 User Manual

EKO INSTRUMENTS CO., LTD. - Pyranometer MS-80/80S/80U - Instruction Manual Ver. 1
Pg. 2
2. Important User Information
Thank you for using EKO Products
Reading this manual is recommended prior to installation and operation of the product. Keep this manual in
a safe and handy place for whenever it is needed. For any questions, please contact us at below:
2- 1. Contac t Infor mation
EKO INSTRUMENTS CO., LTD.
Asia, Oceania Region
https://eko-asia.com
info@eko.co.jp
EKO INSTRUMENTS Co., Ltd.
1-21-8, Hatagaya, Shibuya-ku
Tokyo, 151-0072 Japan
Tel: +81 [3] 3469-6713
Fax: +81 [3] 3469-6719
Europe, Middle East, Africa, South America Region
https://eko-eu.com
info@eko-eu.com
EKO INSTRUMENTS Europe B.V.
Lulofsstraat 55, Unit 28,
2521 AL, Den Haag, The Netherlands
Tel: +31 [0]70 3050117
Fax: +31 [0]70 3840607
North America Region
https://eko-usa.com
info@eko-usa.com
EKO INSTRUMENTS USA Inc.
111 North Market Street, Suite 300
San Jose, CA 95113 USA
Tel: +1 408-977-7751
Fax: +1 408-977-7741
2- 2. Warr anty a nd Liabili ty
For warranty terms and conditions, please contact EKO Instruments or your distributer for further details.
EKO guarantees that the product delivered to customer has been tested to ensure the instrument meets its
published specifications. The warranty included in the conditions of delivery is valid only if the product has been
installed and used according to the instructions provided in this operating manual.
In case any manufacturing defect[s] occurs, the defected part[s] will be repaired or replaced under warranty;
however, the warranty will not be applicable if:
 Any modification or repair has been done by other than EKO service personnel.
 The damage or defect is caused by disrespecting the specifications mentioned on the product brochure or
instruction manual.

EKO MS-80 Specifications

General

Brand	EKO
Model	MS-80
Category	Measuring Instruments
Language	English