EKO MS-80 - Page 66

EKO INSTRUMENTS CO., LTD. - Pyranometer MS-80/80S/80U - Instruction Manual Ver. 1
Pg. 65
139
Irradiance
(4-20mode 20mA)
F32
Radiation intensity value at 4-20mA mode and an output
current of 20mA defaults use 1600W/m
2
140
141
Manual Mode
Output current value
F32 Used to calibrate the output current value
142
143 to 161 are Reserve
162
Date of manufacture U32 Date of manufacture in YYYYMMDD format
163
164
Serial number U32
Serial number with 32-bit integer value (maximum value
4294967295)
Enter the number part excluding the alphabet S.
165
166 Sensor name (0,1)
Str
Sensor name according to ASCII format, up to 16 characters
Null-terminated unless all 16 characters are used
167 Sensor name (2,3)
168 Sensor name (4,5)
169 Sensor name (6,7)
170 Sensor name (8,9)
171 Sensor name (10,11)
172 Sensor name (12,13)
173 Sensor name (14,15)
174
T.Coeff.a F32 Cell temperature factor a
175
176
T.Coeff.b F32 Cell temperature factor b
177
178
T.Coeff.c F32 Cell temperature factor c
179
180
T.Coeff.d F32 Cell temperature factor d
181
182
L.Coeff.k1 F32 Linear correction factor k1
183
184
L.Coeff.k2 F32 Linear correction factor k2
185
186
L.Coeff.k3 F32 Linear correction factor k3
187
188
L.Coeff.k4 F32 Linear correction factor k4
189
190
Cal.Date U32 Calibration date in YYYYMMDD format
191
192
Cal.Value F32 Calibration value, uV/W/m
2
193
194 to 199 are Reserve