- 4 -
GENERAL INFORMATION ON WATER BLOCK COMPATIBILITY
This CPU liquid cooling unit is pre-assembled for use with modern Intel
desktop socket type motherboards. By default (out of the box) this water
block supports the following CPU sockets:
- Intel® Socket LGA-115x
- Intel® Socket LGA-2011(-3) / 2066
WHAT IS ENCLOSED
The following items are enclosed with each EK-Velocity water block:
- EK-Velocity universal CPU water block.
- PreciseMount universal CPU mounting mechanism:
• M3 threaded thumb screws (4 pcs)
• LGA-2011 M3 threaded mounting studs (4 pcs)
• Springs (4 pcs)
• M3 threaded thumb nuts (4 pcs)
• Washers (4 pcs)
- EK-Velocity Backplate
• Backplate rubber gasket
• Backplate for Intel® LGA-115x socket motherboards
- Allen (hex) key 2.5mm
- Additional Inserts and Jet plates:
• Jet J2 (0.8mm* thick)
- Thermal Grizzly Hydronaut (EKWB 1.0g) thermal grease
To Next Page
Loading...
