ekwb EK-Quantum Vector Trinity RTX 3080/3090 - User Manual

USER GUIDE
GPU WATER BLOCK
EK-Quantum
Vector Trinity RTX 3080/3090

Summary

Preparing the Graphics Card

Removing the Stock Cooler

Use the Phillips head screwdriver to remove six marked screws from the backplate.

Removing the I;O Cover

Remove two screws from the backplate and three from the I/O side.

Removing Stock Backplate and Cooler Frame

Use the Phillips head screwdriver to remove six screws and detach the frame and backplate.

Cleaning the PCB

Cutting and Placing Thermal Pads

Thermal Pad Preparation

Placing Thermal Pads

Applying Thermal Compound

Thermal Compound Application

Installing the Water Block

Placing the Water Block

Attaching the Water Block

Attaching the I;O Cover

Checking for Contact

Installation of Fittings and Tubing

Connecting Fittings and Tubing

Connecting the D-RGB LED Strip

LED Strip Connection

Testing the Loop

ekwb EK-Quantum Vector Trinity RTX 3080/3090 Specifications