ELAC Alchemy DDP-2 Preamplifier | www.elac.com | Page 1
Safety Instructions
1. General information
• Please read and follow these safety instructions.
• Keep them safe for future reference.
• Observe all warnings on the preamplifier and in the manual. Please check the amplifier for damage
before use. The amplifier must be in perfect working condition. Damaged parts may lead to personal
injury.
2. Use only as directed
• Connect the preamplifier according to the instructions in the manual.
3. Location
• Install the preamplifier on a level surface only
• When choosing the location of the preamplifier do not place them in locations that are:
• In direct sunlight
• Very humid
• Prone to vibrations
• Exceptionally hot or cold
WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Do not install the
preamplifier near any heat sources such as radiators, heating valves, stoves, or other apparatus that produce
heat, or in areas where there is a risk of explosion.
• Do not block any ventilation openings. Install in accordance with the instructions.
• Do not install the preamplifier in a closed rack or in a closed cupboard.
• Do not put burning candles on or near the preamplifier.
• Do not install the preamplifier near transformers because electromagnetic stray fields can cause hum
noise.
• In combination with certain materials / lacquers / material surfaces, anti-slip feet may cause colored
imprints on the surfaces.
4. Overload
• Extreme overload of the device due to very high volume may cause damage to individual components.
Because of the possible danger, you should never leave the amplifier under extreme overload conditions
unattended.
To Next Page
Loading...
Need help?
General