ELAC SUB3030 - Controls and Indicators; RCA Line In; Service Connection; AC Inlet

Controls and Indicators
1. RCA Line In — The line level connection is used to connect the subwoofer to your pre-amp/AV receiver.
2. Service — This connection is used for updating the subwoofer and not used for normal operation.
3. AC Inlet — This inlet is a standard IEC power jack. Use the supplied power cord to connect the subwoofer to
an available AC outlet.
ELAC SUB3030 Subwoofer | www.elac.com | Page 5
1
3
2
SUB3030