Industrial Edge Computing Gateway EG500
ELASTEL TECHNOLOGY CO., LTD.
3.2.3 Software
This page provide user check the current installed softeware, and the available software list
from OpenWRT software repertory.
You can also configure the respertory address of your owns from “Configure OPKG”
3.2.4 Startup
You can enable or disable installed initialization scripts here. Changes will applied after a
device reboot.
Warning: If you disable essential init scripts like "network", your device might become
inaccessible!
3.2.5 Scheduled Tasks
This is the system crontab in which scheduled tasks can be defined.
3.2.6 LED Configuration
Customizes the behaviour of the device LEDs if possible.
To Next Page
Loading...
