Industrial Edge Computing Gateway EG500
ELASTEL TECHNOLOGY CO., LTD.
General Settings provide Portocol setting with “DHCP Client”, “PPP”, “PPPoE”, “QMI Cellular”,
“Static address”… options for choose.
And the “Device” provide Ethernet adaptor and others options for choose.
As default, ElastOS pre-configured the zero-touch network configuration that WAN for wired
WAN, SWAN for cellular WAN, and LAN for LAN.
Normally the device will detect WAN/SWAN/LAN available and running up itself without any
extra settings when power on.
It takes Ethernet WAN as main WAN if both interfaces available. And failover between WAN and
SWAN in case the working network failed. You are allowed to modify the settings as your specific
needs.
To Next Page
Loading...
