20
FITTING THE ADJUSTABLE FEET
The adjustable feet must be fitted to the base of the cooker before use.
Rest the rear of the cooker an a piece of the polystyrene packaging exposing the base
for the fitting of the feet.
Fig. 7.2
Fig. 7.3
ASSEMBLING THE
BACKGUARD
• Remove the two spacers “A”
and the screw “B” from the
rear of the cooktop.
• Assemble the backguard as
shown in figure 7.4 and fix it
by screwing the central
screw “B” and the spacers
“A”.
Fig. 7.4
LEVELLING THE COOKER
The cooker may be levelled by
screwing the lower ends of the
feet IN or OUT (fig. 7.3).
To Next Page
Loading...
