6. When the time is set, it will begin to count down immediately. The display will show the
remaining time.
7. Buzzer will beep for 30 seconds and the timer indicator shows “- -” when the setting time
finished.
Setting the timer to switch off one or more cooking zones
If you are selected any cooking zone
1. Touching the heating zone selection control that you want to set the time.
2. Touch the timer control, “10” will show in the timer display. “0” will flash and ready to set
the timer.
3. Set the timer setting by sliding the controls to right. Now the timer will from 10 minutes
become 15 minutes.
4. Touching timer control again, the first digit will flash and ready to set the timer.
To Next Page
Loading...
