36
S ETTING TIME O F DAY (g. 7.2)
The programmer is provided with an
electronic clock with luminous gures
showing the hour and minutes.
The rst time the oven is connected up to
the electricity supply and after a power cut,
three zeroes will ash on the programmer
display.
To adjust the time, the two buttons “B” + “C ”
must be pressed simultaneously and then
the button “D” or “E” until the correct time
is set.
Setting speed automatically increases if
you keep the setting buttons pressed.
MANUAL O P ER ATIO N
To use the oven manually, i.e. without the
programmer, you must cancel the ashing
AUTO (or A)
by pressing the two buttons
“B” + “C ” simultaneously (the letter
AUTO
(or A)
will go out and the symbol will
come on).
C ANC ELLING A P R O G R AMME
If the letter
AUTO (or A)
is not ashing
(which means that a cooking program
has already been set) by pressing the two
buttons “B” + “C ” simultaneously you will
cancel the program and switch to manual.
If the oven is on, you must switch it o
m a n u a l l y .
Fig. 7.2 Fig. 7.3
A B C
D
E
A
symbol AUTO or A
A B C
D
E
To Next Page
Loading...
