38
S EMI - AUTO MATIC C O O K ING
This automatically switches the oven o
after the required cooking time. There are
two methods of semi-automatic cooking:
1 ° METH O D: P r o g r a m m i n g t h e
c o o k i n g t i m e (g. 7.6)
• Set the cooking time by pressing
button “B” and then button “E” to move
forward or “D” to move back if you
have gone beyond the required time.
The letter
AUTO (or A)
and the symbol
will appear.
2 ° METH O D: P r o g r a m m i n g t h e e n d o f
c o o k i n g t i m e (g. 7.7)
• Set the end of cooking time by pressing
button “C ” and then button “E” to move
forward or “D” to move back if you
have gone beyond the required time.
The letter A and the symbol
will appear.
Having programmed according to one of
the above methods, set the temperature
and function via the function selector and
thermostat knob (see specic chapters).
The oven will come on immediately and
when the set time or programmed end of
cooking time expires, it will automatically
switch o.
During cooking the letter
AUTO (or A)
and
the symbol
remains on; press button
“B” to display the remaining time until end
of cooking.
The cooking program can be cancelled at
any time by pressing the two buttons “B” +
“C ” simultaneously.
At the end of cooking, turn the oven knob to
the o position the
symbol will go out.
The letter
AUTO (or A)
will ash and the
acoustic signal will come on - this can be
switched o by pressing any of the buttons.
Reset the function selector and thermostat
knob and set the programmer to manual
by pressing the two buttons “B” + “C ”
simultaneously.
Im p o r t a n t : Also if oven is turned o
automatically by the programmer,
remember to turn to the o position the
function selector and the thermostat knob.
If not, when pressing two buttons “B” + “C ”
simultaneously for manual use, the oven
will start to operate.
Remember to press the two buttons “B” +
“C ” simultaneously to be able to use the
oven in manual setting.
Fig. 7.6 Fig. 7.7
A
B
D
E
symbol AUTO or A
A
C
A
D
E
symbol AUTO or A
A
C
B
To Next Page
Loading...
