EasyManua.ls Logo

Elba EPAC-D3910 - Drainage Method

Elba EPAC-D3910
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Timer mode
In standby state, press the timer key to set ON timer. Press Up and Down keys to set ON
timer (0~24H), and the timer indicator lamp lights up.
In operating state, press the timer key to set OFF time. Press Up and Down keys to set
OFF timer (0~24H), and the timer indicator lamp lights up.
The timer can be set at every 1 hour interval.
Remote Control Operating Instruction
The operation of the remote control is as follow:
Power Button: Press this button to turn on/off the appliance.
Timer Button: Press this button to activate timer on/off function. The timer will illuminate
while pressing the Up and Down button can set the desired on/off timer.
High Button: Press this button to select high fan speed.
Low Button: Press this button to select low fan speed.
Up / Down button: Press this button to select the temperature / timer.
ºC/ºF Button: Press this button to switch between ºC and ºF temperature display.
Cool Button: Press this button to operate in cooling mode.
Dry Button: Press this button to operate in dehumidification (dry) mode.
Fan Button: Press this button to operate in fan only mode.
Sleep Button: Press this button to activate sleep mode.
DRAINAGE METHOD
This appliance is equipped with automatic water vaporization system. The condenser is cooled with
the circulating of condensing water to improve cooling efficiency and energy saving.
If the internal water tank is full of water, the water full indicator will turn on, and the
compressor stops operate automatically. Switch off the power and unplug the appliance.
Move the appliance carefully to avoid spillage of water from the tray at the bottom of the
appliance.
Prepare a container to contain water below the water outlet at the rear of the appliance.
Remove the drainage cap by turning it counter-clockwise. Unplug the rubber plug and the
water will flow out from the appliance to the container.
Once the water has been fully drained, insert the rubber plug and fasten the drainage cap.
NOTE: Please carefully remove the rubber cap and take care of the drainage cap properly.
Always tighten the rubber plug and drainage cap before operating the appliance.

Related product manuals