4
INSTALLATION
Installing the Appliance
Settle the appliance in an upright position for at least 2 hours before first use.
Always move the appliance in the upright position.
Do not install or operate this air-conditioner in a bathroom or other wet environments.
Place it on a flat and even place, keep it at least 50cm away from its surrounding object.
Lift up the C shape buckle of the heat exhaust gently from the rear of the appliance.
Insert the exhaust hose at the air outlet and make sure it sits properly onto the air outlet by
turning few rounds clockwise.
Secure the exhaust hose by turning the C shape buckle of the heat exhaust gently. Fasten
the clip of the buckle until it clicks with the trigger.
The end of the exhaust hose must reach one step inside the bottom part of the air outlet.
Hold the unit with one hand and pull the exhaust hose from the appliance to extend the
length of the exhaust hose. Be careful not to tilt the appliance when pulling the exhaust
hose.
Insert the circular connector onto the exhaust hose properly by turning few rounds
clockwise.
To Next Page
Loading...
