Elcometer 106 - 1.1 STANDARDS; 1.2 THESE INSTRUCTIONS; 1.3 WHAT THE BOX CONTAINS

R
3
1.1 STANDARDS
Your Elcometer 106 Pull Off Adhesion Tester can be used in accordance with the following National and
International Standards ASTM D 4541, AS/NZS 1580.408.5, EN 13144, ISO 4624 supersedes EN 24624 &
NF T30-062, ISO 16276-1, & NF T30-606.
1.2 THESE INSTRUCTIONS
These instructions describe the operation of the following models of the Elcometer 106:
Elcometer 106/1 Scale 1(0) to 3.5 N/mm² (500 psi)
Elcometer 106/2 Scale 2(0) to 7 N/mm² (1000 psi)
Elcometer 106/3 Scale 3(0) to 15 N/mm² (2000 psi)
Elcometer 106/4 Scale 4(0) to 22 N/mm² (3200 psi)
Elcometer 106/5 Scale 5(0) to 0.2 N/mm² (30 psi)
1.3 WHAT THE BOX CONTAINS
• Elcometer 106 Pull Off Adhesion Tester
(Scale 1, 2, 3, 4 or 5)
• 20 Dollies
• Pack of Araldite Adhesive
• Base Support Ring
• Magnetic Dolly Clamp
• Dolly Cutter
• Ratchet Spanner (Scale 3 and 4 only)
106_TMA_0003_00_06.fm Page 3 Wednesday, January 21, 2009 3:21 PM