Need help?Do you have a question about the Elcometer 355 and is the answer not in the manual?
General| Measurement type | Coating Thickness |
|---|---|
| Principle | Magnetic induction and eddy current |
| Display | LCD |
| Data storage | Up to 1000 readings |
| Power Supply | 2 x AA batteries |
| Units | µm, mils |
| Statistics | Max, Min |
| Resolution | 0.1 µm (below 100 µm), 1 µm (above 100 µm) |
| Storage Temperature | -20 to 60 °C |
Lists national and international standards the Elcometer 355 can be used with.
Guide on how to insert and replace batteries, including polarity and disposal.
Steps for connecting a probe module to the gauge.
Procedure for powering the gauge on and off, including automatic shut-off.
How to select, create, or view existing data batches.
How to view data within a batch and navigate through it.
Procedures for clearing or deleting current and defined batch data.
Steps to set high and low limits for readings.
Setting up and using password protection for the gauge.
Setting reasonable limits for readings to improve accuracy and user feedback.
Selecting normal, averaging, or counted average data collection modes.
How to calculate and store average values from multiple readings.
How to predetermine the number of readings for calculating an average.
Step-by-step guide for connecting the gauge to a PC via cable.
Details on different probe types, their part numbers, ranges, and accuracy.
To Next Page
