R
2
Thank you for your purchase of this Elcometer 355 Coating Thickness Gauge. Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply of coatings inspection equipment. Our
products cover all aspects of coating inspection, from development through application to post application
inspection.
The Elcometer 355 Coating Thickness Gauge is a world beating product. With the purchase of this gauge
you now have access to the worldwide service and support network of Elcometer. For more information visit
our website at www.elcometer.com
1 ABOUT YOUR GAUGE
The Elcometer 355 Coating Thickness Gauge is a handheld gauge for fast and accurate measurement of
the thickness of coatings.
With a memory of up to 10 000 readings in multiple batches and accuracy to ±1%, your gauge is a
measuring system packed with time saving and cost cutting features.
1.1 STANDARDS
The Elcometer 355 can be used in accordance with the following National and International Standards:
FERROUS (F)
ASTM B 499, ASTM D 1186-B, ASTM G 12, BS 3900(C5), BS 5411 (11), DIN 50981, IMO MSC.215 (82),
IMO MSC.244(83), ISO 1461, ISO 2063, ISO 2808-7C, supersedes ISO 2808-6A, BS 3900-C5-6A, BS
5411-11, DIN 50981, ISO 2808-12, ISO 19840, NF T30-124, SSPC-PA2.
To Next Page
Loading...
Need help?
General
