Need help?Do you have a question about the Elcometer 331 Series and is the answer not in the manual?
General| Model | Elcometer 331 Series |
|---|---|
| Type | Coating Thickness Gauge |
| Measurement Principle | Magnetic Induction / Eddy Current |
| Substrate | Ferrous / Non-Ferrous |
| Units | µm / mils |
| Display | LCD |
| Power Supply | Battery |
| Resolution | 0.1 µm / 1 µm (depends on range) |
Lists key features and capabilities of the Elcometer 331 Concrete Covermeter models.
Lists the items included in the product packaging for the Covermeter.
Details on charging, using, and maintaining the rechargeable battery pack.
Instructions on connecting search heads to the Covermeter unit.
Explains how to identify the different types of search heads available.
Instructions for connecting half-cell probes to Model BH.
Details the main unit and search head keypads and their functions.
Procedures for powering the device on, off, and managing auto-switch off.
Explains the information shown on the device display screens.
Guide to changing the device language from the setup menu.
Information on connecting the Covermeter to a PC via RS232.
Instructions for connecting and using the optional earphone.
Procedure for zeroing the instrument for accurate measurements.
Explains how to access and navigate the main menu options.
Sets the instrument mode to Cover or Half-cell measurement.
Accesses settings for units, volume, language, and screen.
Provides gauge and probe information and contact details.
Resets the Covermeter to International or USA settings.
Selects measurement units (Millimetres or Inches).
Prerequisites and checks before locating reinforcement bars.
Step-by-step guide for finding one layer of reinforcement bars.
Procedure for locating individual layers of reinforcement bars.
How to find the direction or orientation of a reinforcement bar.
Guidance for practicing bar location and orientation techniques.
Technique for systematically mapping reinforcement bar locations.
Prerequisites and checks before measuring depth of cover.
Step-by-step guide for measuring the depth of concrete cover.
Conditions required for accurate depth of cover readings.
Prerequisites and checks before measuring half-cell potential.
Step-by-step guide for measuring half-cell potential for corrosion.
Technique for cell-to-cell measurements without direct bar access.
Usage and features of the Borehole Probe search head.
Accessory for reaching difficult areas with search heads.
Procedure for wetting the probe sensor for optimal function.
Instructions for cleaning and maintaining half-cell probes and cables.
Details the effect of temperature on half-cell potential measurements.
Information on probe storage and its expected shelf life.
Steps to design and download custom welcome screens.
Steps to remove custom welcome screens from the device.
Details on range, accuracy, and resolution for various search heads.
Physical specifications of the Covermeter, including weight.
Details on the internal rechargeable battery and charger specifications.
To Next Page
