Need help?Do you have a question about the Elcometer 345 and is the answer not in the manual?
General| Type | Coating Thickness Gauge |
|---|---|
| Measurement Principle | Magnetic Induction (F), Eddy Current (N) |
| Display | LCD |
| Power Supply | 2 x AA batteries |
| Non-Ferrous (N) Range | 0 to 2, 000 µm |
| Accuracy | ±(1% + 1 µm) |
| Resolution | 0.1 µm |
| Battery Life | Up to 50 hours |
| Operating Temperature | -10 to 50 °C |
| Storage Temperature | -20 to 60 °C |
| Ferrous (F) Range | 0 to 1, 500 µm |
Lists key features of the Elcometer 345 gauge, including calibration, units, and data output.
Lists national and international standards the Elcometer 345 complies with or can be used with.
Lists the items included in the product packaging for the Elcometer 345.
Instructions for installing or replacing batteries in the gauge.
Describes low battery indication and replacement procedures.
Guide to fitting the neck harness and connecting the separate probe.
Covers powering on/off, display, unit changes, and key-lock functionality.
Explains backlight operation, simple statistics, and deleting readings.
Basic steps for powering the gauge on and off.
How to switch between metric and imperial units.
Quick guide to calibrating on smooth substrates.
Explains error messages encountered during calibration and troubleshooting steps.
Procedure for calibrating the gauge on smooth, flat surfaces.
Procedure for calibrating on rough surfaces and special substrates.
Method for adjusting readings on blast cleaned or roughened surfaces.
Instructions on how to restore the gauge's factory calibration settings.
Overview of available statistical functions like mean, standard deviation, and readings count.
How to view calculated statistical data from the gauge.
Procedure to reset or clear statistical data from the gauge's memory.
How to customize which statistical values are displayed.
Example of setting up a user list for displaying statistical data.
Lists available calibration foil sets with their part numbers.
Information on obtaining calibration certificates for foils.
Details on ordering test certificates for probe performance.
Details on coated thickness standards including certificates.
Information and part numbers for the infrared portable printer.
Lists available probe adaptors like hand grips and V adaptors.
Information on the gauge holster for integral and separate probe versions.
Details on protective gauge covers (pack of 5).
Information on the wrist harness accessory.
To Next Page
