EasyManua.ls Logo

Elcometer 319 S User Manual

Elcometer 319 S
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Guide
Elcometer 319 Model S & T
Dewpoint Meter
www.elcometer.com
R

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Elcometer 319 S and is the answer not in the manual?

Elcometer 319 S Specifications

General IconGeneral
BrandElcometer
Model319 S
CategoryMeasuring Instruments
LanguageEnglish

Summary

1 GAUGE OVERVIEW

2 BOX CONTENTS

Lists all items included in the product package, such as the gauge, pouch, batteries, and software.

3 USING THE GAUGE

4 GETTING STARTED

4.1 FITTING THE BATTERIES

Instructions for installing and replacing the gauge's AA alkaline batteries, including polarity guidance.

4.2 SELECTING YOUR LANGUAGE

Steps to select the desired language for the gauge interface via the ON/OFF button and menu.

4.3 SCREEN SETTINGS

Options to adjust backlight brightness and set a timeout period for display dimming.

4.4 SETTING UP THE READING DISPLAY

Guide to selecting up to five climatic parameters to be displayed on the main screen.

4.5 SELECTING THE MEASUREMENT UNITS

Instructions on how to choose measurement units such as °C, °F, g/kg, or gr/lb.

4.6 SETTING MANUAL OR INTERVAL LOGGING

How to configure the gauge for manual data logging or automatic interval logging (Model T).

5 THE SENSORS

TO AVOID DAMAGE

Important precautions to prevent damage to the gauge's humidity and surface temperature sensors.

6 SETTING LIMITS

To set limits for a batch (Model T)

Procedure to set high and low limits for readings when creating a new batch.

7 TAKING A READING

7.1 BEFORE YOU START

Pre-measurement checks and setup steps required before taking readings.

7.2 TAKING A READING IN IMMEDIATE MODE

Procedure for taking manual readings and saving them into the gauge's rolling memory.

7.3 TAKING A READING IN BATCH MODE (MODEL T)

How to take readings manually or automatically at set intervals within a batch.

8 USING EXTERNAL TEMPERATURE PROBES

8.1 FITTING AND EXTERNAL TEMPERATURE PROBE

Instructions on how to connect an external k-type temperature probe to the gauge.

8.2 PREPARING THE GAUGE FOR USE WITH AN EXTERNAL PROBE

Guidance on preparing the gauge and probe for accurate measurements, including temperature ranges.

9 STATISTICS

10 BATCHING - MODEL T

10.1 CREATING A NEW BATCH

Steps to create a new data batch for manual or interval logging modes.

To create an ‘Interval Logging' batch

Procedure for creating a batch that logs data at set time intervals, including setting the interval.

11 REVIEWING BATCH DATA - MODEL T

11.1 BATCH READINGS

How to view the logged readings for a specific batch, including date, time, and values.

11.2 BATCH STATISTICS

How to access and view statistical summaries for a batch, such as average and highest readings.

12 MENU STRUCTURE - MODEL S

13 MENU STRUCTURE - MODEL T

14 DOWNLOADING DATA - MODEL T

14.1 DOWNLOADING DATA USING ELCOMASTER®

Instructions for transmitting readings to a PC for archiving using ElcoMaster software via USB or Bluetooth.

14.2 DOWNLOADING DATA USING ELCOMASTER® MOBILE APPS

How to download data using mobile applications, enabling storage with GPS and photos.

15 SPARES & ACCESSORIES

15.1 MAGNETIC SURFACE TEMPERATURE PROBES

Details and part numbers for various magnetic surface temperature probes available.

15.2 OTHER ACCESSORIES

Lists other available accessories for the Elcometer 319, such as probes, pouches, and cables.

16 WARRANTY STATEMENT

17 TECHNICAL SPECIFICATION

18 LEGAL NOTICES & REGULATORY INFORMATION

Related product manuals