Elcometer 415 - User Manual

Elcometer 415
Paint & Powder Gauge
(for measuring on smooth surfaces)
User Guide
www.elcometer.com
R

Summary

Using the Gauge

Getting Started and Firmware Upgrade

Initial setup, firmware updates, and essential starting procedures.

Fitting the Batteries

Gauge Operation and Settings

Taking a Reading

Calibrating the Gauge

Selecting the Calibration Method

Using Zero Calibration

Step-by-step instructions for performing zero calibration.

Using Smooth Calibration

Step-by-step instructions for performing smooth calibration.

Gauge Calibration Check and Data Download

Upgrading Your Gauge

Technical Specification

Elcometer 415 Specifications

General

Units	µm, mils
Display	LCD
Power Supply	2 x AAA batteries
Operating Temperature	0 to 50°C
Measurement Principle	Magnetic Induction (Ferrous - F) / Eddy Current (Non-Ferrous - N)
Substrates	Ferrous (F) & Non-Ferrous (N)
Resolution	0.1 µm (0.01 mils)
Storage Temperature	-20 to 70°C (-4 to 158°F)