Need help?Do you have a question about the Elcometer 207 and is the answer not in the manual?
General| Brand | Elcometer |
|---|---|
| Model | 207 |
| Category | Measuring Instruments |
| Language | English |
Lists all items included in the gauge packaging.
Details the key measurement modes and features of the gauge.
Instructions for installing and replacing the gauge's batteries.
Explains the function and selection of the ultrasonic transducer.
Describes the function of each button on the Elcometer 207 keypad.
Describes the function of each button on the Elcometer 207DL keypad.
Explains the gauge display interface and stability indicator.
Details the meaning of the green and red indicator lights on the gauge.
Prerequisites and preparation steps before taking a reading.
Step-by-step procedure for calibrating using a known thickness standard.
Guide to calibrating the gauge using known sound velocity values.
Details the three primary measurement modes: echo-echo, interface-echo, and automatic.
Describes the Scan Mode for finding the thinnest point over an area.
Explains how to use Differential Mode for comparing measurements to a nominal value.
How to configure audible and visual alarms for thickness measurements.
Instructions for setting the display backlight to on, off, or auto.
Steps to connect the gauge to a computer using the data transfer cable.
Guide to configuring communications software for data transfer.
Explains how to send measurement data from the gauge to a computer.
Steps to activate and configure the data logger for storing readings.
How to record measurements into the data logger's memory.
Procedure for clearing data from a specific memory location.
Steps to clear all stored readings from a batch.
Instructions for clearing all data from all batches in the data logger.
How to transfer recorded data from the logger to a computer.
Guide to printing stored data batches from the logger.
Details the conditions that void the product warranty.
Procedures for obtaining warranty service for the gauge.
Information on how to get service after the warranty has expired.
How initial signal strength impacts measurement accuracy.
Explains how material properties affect ultrasound propagation.
How the physical shape of the transducer affects its application.
How material temperature impacts measurements and transducer choice.
Advice for measuring the wall thickness of tubing.
Procedures for taking measurements on hot materials.
Considerations for measuring thickness of laminated materials.
Techniques for measuring thickness through paint and coatings.
Details on using EDTS+ Excel Link for data processing.
Information on EDCS and EDCS+ software for data management.
Instructions for installing the data transfer software.
To Next Page
