21
6.3 DIFFERENTIAL MODE
Your gauge includes Differential Mode which allows it to display the positive or negative difference from
an entered nominal value.
To switch differential mode on/off and enter the value:
1. Switch on the gauge.
2. Press the DIFF key.
The gauge will display DIFF OFF or DIFF
followed by a thickness value and flashing MM
(or IN), depending on which mode the gauge is
in.
3. Repeat step 2 to toggle differential mode on or
off.
4. Assuming DIFF value flashing MM is
displayed, use the UP and DOWN arrow keys
to scroll to the desired nominal thickness
value.
5. Press the SEND key to select the nominal
value entered.
1. Switch on the gauge.
2. Press
MODE
key.
3. Press
UP
and
DOWN
arrow keys to scroll to
dIFF
symbol.
The gauge will display
DIFF OFF
or
DIFF
followed by a thickness value and flashing
MM
(or
IN
), depending on which mode the gauge is in.
4. Press
SEND
key to switch differential mode on or
off.
5. Assuming
DIFF
value flashing
MM
is displayed,
use the
UP
and
DOWN
arrow keys to scroll to the
desired nominal thickness value.
6. Press
SEND
key to select the desired nominal
value and return to mode menu.
7. Press
MODE
key when finished.
To Next Page
Loading...
Need help?
General
