Need help?Do you have a question about the Elcometer 138 and is the answer not in the manual?
General| Brand | Elcometer |
|---|---|
| Model | 138 |
| Category | Measuring Instruments |
| Language | English |
Steps to take before starting the ISO 8502-6 / ISO 8502-9 test procedure.
Detailed steps for performing the ISO 8502-6 / ISO 8502-9 salt extraction and measurement.
Steps to follow after completing the ISO 8502-6 / ISO 8502-9 test.
Method for converting conductivity readings to surface density of salts for ISO tests.
Steps to take before starting the US Navy PPI 63101-000 test procedure.
Detailed steps for performing the US Navy PPI 63101-000 salt extraction and measurement.
Steps to follow after completing the US Navy PPI 63101-000 test.
Defines the conductivity thresholds for passing or failing the US Navy PPI test.
Physical dimensions and weight of the Elcometer 138 Bresle Salt Kits.
Details on the size, test area, and sample volume of the Bresle patches.
Measurement principle, range, resolution, accuracy, operating conditions, and battery info.
Measurement principle, range, resolution, accuracy, operating conditions, and battery info.
Information on the standard calibration solution, including part number.
Available Bresle patches and their part numbers.
List of other available spare parts and accessories with part numbers.
Important safety warnings and handling guidelines for the Elcometer 138 meters.
Instructions on how to install and replace the batteries in the Elcometer 138 meter.
Explanation of the buttons, display indicators, and their functions on the Elcometer 138.
Steps for preparing the sensor's electrode surface for optimal performance.
Step-by-step guide for calibrating the Elcometer 138 meter using standard solutions.
Procedure for taking accurate conductivity or salt density readings with the meter.
Steps to perform after completing a measurement with the Elcometer 138.
Guidelines for maintaining the Elcometer 138 meter to ensure its longevity and performance.
To Next Page
