Elcometer 138 - User Guide; Table of Contents

CONTENTS
R
en-1 www.elcometer.com
Section
Page
1
Overview
en-2
2
Box Contents
en-3
3
Test Procedure: ISO 8502-6 / ISO 8502-9
en-4
4
Test Procedure: US Navy PPI 63101-000
en-7
5
Technical Specification
en-10
6
Spares & Accessories
en-13
7
Legal Notices & Regulatory Information
en-14
APPENDIX A: Using the Elcometer 138 Bresle Salt Meter or Elcometer 138 Conductivity Meter
A1
Caution
en-16
A2
Fitting and Replacing the Batteries
en-1 6
A3
The Controls and Display
en-17
A4
Electrode Surface Treatment Procedure
en-19
A5
Calibration Procedure
en-19
A6
Taking a Reading
en-20
A7
After Measurement
en-21
A8
Care and Maintenance
en-21
For the avoidance of doubt, please refer to the original English language version.
A Material Safety Data Sheet for the Elcometer 138 Standard 84μS/cm Calibration Solution is available to download via our website:
http://www.elcometer.com/images/stories/MSDS/Elcometer_138_84uScm_Calibration_Solution.pdf
© Elcometer Limited 2009-2019. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored (in a retrieval system
or otherwise) or translated into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without
the prior written permission of Elcometer Limited.