6
1.1 GAUGE FEATURES
• User adjustable calibration
• Switchable between metric and imperial units
• Bleep (when valid reading taken)
• Infrared data output (to mini-printer)
• Simple Statistics
1.2 STANDARDS
The Elcometer 345 can be used in accordance with the following National and
International Standards,
ASTM B 499, ASTM D 1186-B, ASTM G 12, BS 3900 (C5), BS 5411 (11), DIN 50981, IMO
MCS.215 (82/84), IMO MSC.244(83), ISO 1461,
ISO 2063, IS0 2808-7C, ISO 2808-12, ISO 19840, NF T30-124, SSPC-
PA2 (2004).
For IMO, PSPC
a
, the thickness coating, should be measured and recorded. Your Elcometer 345 can be
used for this.
1.3 WHAT THE BOX CONTAINS
• Elcometer 345 Coating Thickness Gauge with batteries fitted
• Set of calibration foils
• Neck harness
• Carrying case
• Operating instructions
a. International Marine Organisation, Performance Standard for Protective Coatings.
To Next Page
Loading...
