Elcometer 345 - Clearing Statistical Data

R
22
If is pressed the gauge displays the next statistical value on the user list for a minimum of 3
seconds.
If is pressed the gauge displays the previous statistical value on the user list for a minimum of 3
seconds.
• To display the rest of the list of values or must be pressed while the current value is on the
display.
• To exit the list press .
STATISTICAL SYMBOLS
= Number of readings
= Mean (Average)
= Standard Deviation
H = Highest reading
L = Lowest reading
6.3 CLEARING STATISTICAL DATA.
• To clear the statistical data when starting a new set of data press >>>> >>>> . The
display will show CLs to indicate “Clear Statistics?”.
• Press to clear statistics memory or press to exit without clearing the statistics memory.
Note:
4
Err is displayed when the memory for statistical values is full.