Elcometer 331 Series User Manual

7
G ETTING STARTED
R
3.4 Fitting half-cell probes
(This section applies to Elcometer 331 Model BH only)
Connect the probe and cables as shown in Figure 5. The search head can be left connected to the
gauge at the same time as the half-cell probe, however for ease of use it is recommended that the
search head is removed and stored in the carry case.
Figure 5. Fitting half-cell probe and cables
Black
cable
Red
cable
331.book Page 7 Thursday, March 12, 2009 9:51 PM

Elcometer 331 Series Specifications

General

Brand	Elcometer
Model	331 Series
Category	Measuring Instruments
Language	English