R
24
Press [ENTER] to se the correct value (or [Esc] to cancel the operation).
Press [SETUP] or [Esc] to return to the menu.
7.10 DATA COLLECTION/STATISTICAL FUNCTIONS
After pressing [SETUP], Function No 10 (SEL) will be displayed:
Select normal, averaging or counted average mode and their associated setups.
For a description of average and counted average, see “Statistics” on page 26
Press [ENTER] and use [<] or [>] to step through the sub-functions:
Press [ENTER] to select normal mode.
Press [ENTER] to select average mode.
Press [ENTER] to view and modify the number of readings used for the counted
average (use [<] and [>] to adjust the value) The minimum value is 1, the
maximum value is 99.
Press [ENTER] to accept the new number of readings or [Esc] to return to the
‘SEL’ display.
To Next Page
Loading...
Need help?
General
