Elcometer 270 User Manual

www.elcometer.com
en-6
R
5 SPARES & ACCESSORIES
Description
Part Number
Standard Wand with Flat Sponge
A universal at sponge to suit almost all applications.
T27016867
Flat Sponge Set, Pack of 3
150 x 60 x 25mm (6 x 2.3 x 1")
T27018050
Roller Wand with Roller Sponge
Ideal for large at surface inspection.
T27016960
Spare Roller Sponge
T27018051
Telescopic Wand Adaptor
Extends to 1m (39"), ideal for oors or high areas.
Supplied with lead and belt clip. Sponge not supplied.
T27016998
Separate Wand Adaptor
For use with extension pieces. Supplied with lead
and belt clip.
T27016999
Extension Piece
Extends to 0.4m (16.5"). Extension pieces can be
connected together to make longer wands.
T27016965
Wetting Agent, 50ml (1.7oz) Bottle
Kodak Photo-Flo™ supplied. Can significantly
reduce the surface tension of the water, therefore
allowing the moisture to penetrate the smallest of
pinholes.
T27018024
Signal Return Cable, 4m (13')
Complete with crocodile clip and connection plug.
T99916954
Signal Return Cable, 10m (32')
Supplied on a drum complete with crocodile clip and
connection plug.
T99916996
Pinhole Inspector’s Kit
Supplied with standard wand with at sponge, roller
wand with roller sponge, telescopic wand adaptor,
extension piece (x2), 10m (32') signal return cable,
wetting agent, spare at sponge, spare roller sponge
and AA batteries (x3). The kit does not include the
Elcometer 270 instrument - to be ordered separately.
T27018191
Pinhole Inspector’s Kit Carry Case
Empty case with foam cut-outs only.
T27018025
Note: A Material Safety Data Sheet for the Wetting Agent (Kodak Photo-Flo™)
supplied as an accessory for the Elcometer 270 is available to download via our
website:
http://www.elcometer.com/images/stories/MSDS/elcometer_270_wetting_agent.pdf

Elcometer 270 Specifications

General

Brand	Elcometer
Model	270
Category	Security Sensors
Language	English