To Next PageTo Next Page
Need help?Do you have a question about the ELCOS DCA-120/10 and is the answer not in the manual?
Detailed steps for replacing the control unit, including memory transfer.
How to transfer programming operations between control units.
Setting engine parameters, functions, and programmable times.
Managing maintenance, anomaly logs, relays, and transmitters.
Configuring engine type and make using the CAN Bus SAE J1939 protocol.
Adjusting RPM variations, speed, and deviation for engine control.
Assigning programmable protection or inhibition to Input 41.
Setting the threshold for the running engine based on charging alternator signal.
Calibrating tachometer and setting overspeed thresholds.
Adjusting engine speed via pickup signals and controlling over/underspeed.
Programming fixed-time and cyclical maintenance indications.
Description of various time parameters that can be programmed.
Setting preheating operation time and starting attempt operation time.
Overview of alarm codes, thresholds, and intervention logic.
Details on thresholds for battery voltage, overheating, and low oil pressure.
Setting warning and stop thresholds for engine overtemperature.
General| Brand | ELCOS |
|---|---|
| Model | DCA-120/10 |
| Category | Control Unit |
| Language | English |
