8-11
HOW TO USE YOUR CARAVAN’S EQUIPMENT
WHALE WATER HEATER
The new Whale 8L Gas and Electric Storage
Water Heater incorporates a host of benefits
to the OEM, installer and the caravanner.
• 8L capacity hot water tank.
•Lightest model in the range - only 8kg
(dry weight)
• Gas and electric setting gives a greater
kW input for rapid heat up times.
• The robust expanded polypropylene
insulation makes the Whale Water Heater
extremely efficient in retaining heat for
longer.
•Fits in confined spaces in your bunk,
saving valuable storage space.
• Doesn't require an external flue cover
that can be easily lost.
• Pressure relief valve incorporating drain
function - drains entire water system
faster.
Rapid and Efficient Heat
The unique twin element (patent pending)
allows a choice of settings. A low setting of
750 W and a high setting of 1500W gives the
option of low power consumption for faster
water heat up.
Versatile Control
The Whale 8L Water Heater has simple to
use on/off switch control functions to provide
5 running options.
• Gas Only
•Electric Low Setting
•Electric High Setting
• Gas and Electric Low
• Gas and Electric High
IMPORTANT:
In the interest of safety, replacement parts
for an appliance shall conform to the
appliance manufacturer’s specifications
and should be fitted by him or an
authorised agent.
Water Heater Control Panel
A Gas Indicator Indicates that the heater is
operating on gas
B Diagnostic Indicator Will flash if heater has failed
to turn on due to a fault,
under normal operation this
light will remain turned off.
1a Gas Off Gas off position
1b Electricity Off Electricity off position
1a&1b Heater Off To turn the heater off
completely
1b&2 Gas function To operate the heater on
gas only
1b&3 Electric low only To operate the heater on
electric low setting only
1a&4 Electric high only To operate the heater on
electric high setting only
2&3 Gas and Electric low To operate on gas and
electric low
2&4 Gas and Electric high To operate on gas and
electric high
NOTES: 1. When operating on gas the green LED will be
lit to show that the gas is burning safely.
2. When operating on electric no LED will be lit.