EasyManua.ls Logo

Eleaf iStick Basic - User Manual

Eleaf iStick Basic
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Notice for Use
Thank you for choosing Eleaf products! Please read this manual carefully before
use so as to use correctly. If you require additional information or have questions
about the product or its use, please consult your local agents, or visit our website
at www.eleafworld.com.
Product Introduction
The iStick basic with the GS Air 2 atomizer is a new starter kit from Eleaf. Not
only does the iStick basic have a large battery capacity of 2300mAh, it also
features its innovative magnetic connector and atomizer built-in structure for ease
of usage and carry. With a fashionable metallic appearance, the iStick basic also
comes with many attractive colors for your options.
How to use:
1) Assembling:
1.First screw the atomizer head onto the atomizer base tightly;
2.Next put together atomizer base, atomizer tube and mouthpiece;
3.Then screw the GS Air 2 atomizer onto the magnetic 510 connector tightly;
4.Finally put the GS Air 2 atomizer into the iStick basic.
2) E-liquid Filling:
1.First pull out the atomizer from the iStick basic;
2.Next unscrew the atomizer base off the atomizer;
3.Then slowly fill the e-liquid into the atomizer along the tube;
4.Finally screw the atomizer base onto the atomizer again.
GS Air HeadAtomizer Base
GS Air 2 Atomizer (14mm) 510 Connector
Button Charging Port
Question and Answer IconNeed help?

Do you have a question about the Eleaf iStick Basic and is the answer not in the manual?

Summary

Product Introduction

How to Use

Assembling the Atomizer

Steps to screw the atomizer head onto the base, connect parts, and attach to the magnetic connector.

E-liquid Filling

Instructions for refilling e-liquid into the atomizer, including pre-saturating the wick.

Air Inflow Adjustment

Guidance on adjusting the airflow control ring for different vaping experiences.

Power Operations

Instructions for turning the iStick basic on and off using the button.

Vaping and Charging

How to vape by pressing the button and how to charge the device via USB.

Device Properties and Protections

Protection Features

Details on atomizer, no atomizer, short-circuit, and low-voltage protections.

Battery Level Indication

Explanation of how the white light indicates the remaining battery level.

Precautions and Warranty

Important Usage Precautions

Safety guidelines regarding repair, temperature, and combining parts.

Warranty Information

Information on the product warranty and limitations.

Eleaf iStick Basic Specifications

General IconGeneral
Battery Capacity2300mAh
Tank Capacity2mL
Charging PortMicro USB
Resistance Range0.4-5ohm
ConnectorMagnetic Connector
Dimensions39.5mm x 23mm x 81mm

Related product manuals