44
Fn
The <Fn> switch provides access to up to 14 special functions, some of
which are pre-defined, such as <DX LIST>. F1 through F8 can execute
user-defined command sequences or macros; see MACRO
PROGRAMMING.
The following special functions are available. Other special functions
will be added as they become available.
SCRN CAP (F9)
Tap <Fn>, then <SCRN CAP> to capture the content of both the LCD
and external monitor into two separate files. You'll need to have a USB
flash drive installed in one of the three USB A jacks. Also see
MENU:Screen Cap File. Note: There is no "eject" control for the flash
drive, as required on some computers. The K4 mounts/unmounts the
flash drive (from a software perspective) as needed.
MACROS (F10)
Tap <Fn>, then <MACROS> to enter the macro editor. This can be used
to create user-defined macros for Fn > F1 through F8. Also see MACRO
PROGRAMMING.
SW LIST (F11)
Tap <Fn>, then <SW LIST> to see a list of all software components and
their currently installed revisions. At the top of the screen, in
parentheses, is the overall release number (e.g., R22).
UPDATE (F12)
Tap <Fn>, then hold <UPDATE> to go to the K4 software update
screen. Tap the <?> button for detailed instructions on how to update
software or restore an earlier version. An ethernet connection is
generally required for this purpose, though it's also possible to load
To Next Page
Loading...
