ELECRAFT KX1 - Appendix A - KX1 Parts List; ICs U1, U2; Crystals X2-X5, X1; Encoder Z1

A5 ELECRAFT
Photo Reference Designator Description Quan. Part No.
L6
min. (larger size) RF choke, 6.8 µH (blu-gry-gld)
Note: L6 may be physically larger than L7 in some
kits. This is normal.
1 E690044
L7 min. (larger size) RF choke, 4.7 µH (yel-vio-gold) 1 E690042
L4
micro (smaller size) RF choke,
2.2 µH (red-red-gold)
1 E690036
L5
micro (smaller size) RF choke,
5.6 µH (grn-blu-gold)
1 E690037
L8
micro (smaller size) RF choke,
18 µH (brn-gry-blk)
1 E690040
L9
micro (smaller size) RF choke,
100 µH (brn-blk-brn)
1 E690013
i
Do not mix these
with resistors. Keep them
in their own envelope
until instructed to install
them.
L10
micro (smaller size) RF choke,
33 µH (org-org-blk) Note: Either or both orange
bands may appear to be brown.
1 E690041
P1
Connector., 2-pin male with locking ramp, 0.1"
spacing, for internal battery
1 E620024
Q1, Q2, Q3 Transistor, JFET, J309 (309) 3 E580009
Q4, Q7, Q8, Q9 Transistor, NPN, 2N4124 4 E580006
Q5 Transistor, NPN, 2N3904 1 E580017
Q6 Transistor, NPN power, 2SC2166 1 E580007