Setting the DVD Player
Basic Operation
Press on the remote control unit to setup the initial setting, select
related[SETUP PAGE] with the directional buttons.
Menu Operations
You can setup the mode of audio and video output, initial setup, parental control
level, etc. You can also select the aspect ratio of the playback picture to your
TV screen. Press to display the setup menu and the system will
automatically stop play.
1.System Setup
Press and select system setup page.
TV SYSTEM: Use ▲ ▼ arrow buttons to make TV system selection. There
are four TV output systems to choose from: NTSC, PAL, PAL-M and AUTO.
HD OUTPUT: Use ▲ ▼ arrow buttons to set video resolution, there are
three resolution(720P, 1080I, 1080P).
VIDEO: There are different video output modes to choose from:
INTERLACE-YUV: Use Y Cb Cr terminals to output signals.
P-SCAN YPBPR: Use Y Cb Cr terminals to output signals and convert to
progressive output.
TV TYPE: Using arrow button to select TV aspect ratio.
4:3/PS:
Pan & Scan video output for a normal TV set. The screen displays the
wide picture on the wide screen with a left and right portion automatically
cut Off.
4:3/LB:
Letter Box video output for a normal TV set. The screen displays
the wide picture with bands displayed on the upper and lower portions of
the Screen.
16:9:
6
SETUP
SETUP
SETUP
To Next Page
Loading...